Our Products

TV Modular Electroblotting Systems

The TV modular electroblotting systems provide a complete solution within one gel tank for PAGE and electroblotting. These systems are available in existing TV100 and TV400 formats, and comprise individual gel-running modules designed specifically for PAGE (GRM) and electroblotting (EBGRM).

Download Catalogue
Product Specification
Complete System Part No.
Twin-plate mini-gel unit with GRM and cooled gel tank, with built-in cooling coil and quick-fit tubing, lid, 2 x (10 x 10cm; W x H) plain glass plates, 2 x (10 x 10cm) notched glass plates, 1 x dummy plate, 4 x 1mm thick spacers, 2 x spacer aligners and 2 x 1mm thick 12-sample combs, casting base and
2 x silicone seals; plus EBGRM, 2 x electroblotting cassettes and 4 x fibre pads		 TV100YK-EBSYS
Twin-plate maxi-gel unit with GRM and cooled gel tank, with built-in cooling coil and quick-fit tubing, lid, 2 x (20.5 x 20cm; W x H) plain glass plates, 2 x (20.5 x 20cm) notched glass plates, 1 x dummy plate,
4 x 1mm thick spacers, 2 x spacer aligners and 2 x 1mm thick 24-sample combs, casting base and 2 x silicone seals; plus EBGRM, 2 x electroblotting cassettes and 4 x fibre pads		 TV400YK-EBSYS
Technical Specifications
  TV100YK-EBSYS TV400YK-EBSYS
Unit Dimensions (W x D x H)   28 x 15 x 18cm 38 x 15 x 27.5cm
Inner Tank Dimensions (W x D x H)   16.5 x 11 x 15cm 27 x 12.5 x 25cm
Plate Dimensions (W x H x T)   10 x 10 x 0.2cm 20.5 x 20 x 0.4cm
Standard Spacer Dimensions (W x H x T)   1 x 10 x 0.1cm 2 x 20 x 0.1cm
Active Gel Dimensions (W x H)   8 x 8.5cm 16.5 x 17.5cm
Sample Capacity   2 x 12 2 x 24
Recommended Buffer Volume (PAGE GRM) Inner Buffer Chamber 90ml 700ml
  Gel Tank 1600ml 4200ml
Recommended Running Conditions for SDS-PAGE Voltage 100 – 150V (10 – 15V/cm) 200 – 300V (10 – 15V/cm)
  Current 10 – 15mA 30 – 40mA
  Time 1 – 1.75h 2 – 2.5h
Distance Between Plate Electrodes in EBGRM   6cm 6cm
Electroblotting Cassette Dimensions (W x L)   11.5 x 10.5cm 20.5 x 20cm
Active Transfer Area   71cm2 289cm2
Recommended Running Conditions for Electroblotting Voltage 100V 200V
  Current 75mA (0.6-0.8mA/cm2) 150mA (0.8-1.0mA/cm2)
  Time 4 – 6h 6h to overnight
Snap-lock Connectors for Cooling Coil Inner Diameter 10mm 10mm
  Outer Diameter 12mm 12mm
Quick-fit Tubing Inner Diameter 10mm 10mm
  Outer Diameter 12mm 12mm
Casting Base Silicone Seal Dimensions (W x L x H)   1.5 x 11 x 0.8cm 1.7 x 22.5 x 0.8cm
Power Output Connectors (diameter)   Shrouded, 4mm Shrouded, 4mm
Recommended Power Supplies   Consort EV215 or EV261 Consort EV215 or EV261

7 + 2 =

Other Products

SE600X Chroma™ Deluxe Dual Cooled Vertical Electrophoresis Unit

SE600X Chroma™ Deluxe Dual Cooled Vertical Electrophoresis Unit

Ergonomic design offers easier handling and sample introduction Cat. # Description SE600X-15-1.5 Deluxe Dual Cooled Vertical Electrophoresis Unit, Complete Includes: Lower Buffer Chamber Bubble Level Upper Buffer Chamber Laminated Gaskets for Caster–2 pcs Safety Lid...

Consort EV200 Range Power Supply Units

Consort EV200 Range Power Supply Units

The Consort EV200 power supplies cover the range of voltages and currents used with all Scie-Plas electrophoresis units, whether it is for routine low voltage horizontal and vertical gel electrophoresis or high voltage applications such as isoelectric focusing and...

Beta 3-Sided Shield

Beta 3-Sided Shield

The Beta 3-sided shield can be used with our range of Beta shields, providing further protection

CA-SYS Cellulose Acetate System

CA-SYS Cellulose Acetate System

The CA-SYS cellulose acetate system has been designed in close collaboration with the UK National Health Service (NHS) to run cellulose acetate membranes and wick-based electrophoresis applications, particularly in the two-dimensional screening of inherited metabolic...

The GD-4534 and GD-5040 Gel Dryers

The GD-4534 and GD-5040 Gel Dryers

A cast-aluminium base, overlaid with a porous stainless steel sheet, evenly distributes the heat generated by an 800-Watt heating element, which is set in increments of +/- 2°C to a maximum temperature of 90°C. Both the heating element and vacuum pump are...